Saturday, December 25, 2010

Rust Poisoning From Wok

A difficult year 98.5 Radioactive

Hello friends because as we will be able to explain this 2010 was a difficult year as there was no post and leave a little, but fortunately I'm back next week and publishes good post I'm sure some will love and they will be very useful.

As long as I can only say thank you for your patience and support. A World of Alternatives

Friday, December 24, 2010

Hazards In The Kitchen

Merry Christmas!

There are still some hours to the exact date on which the modern West the victory of light over darkness and life expectancy after the darkest days of the solstice. The Christian celebration of Christmas marks the birth of Christ, a symbol of hope and light of the world. Today
Nisaba
not entertaining in words and syntax, rules and ramblings about writing. Today we join the celebration of the return of the sun on its way to the light and the birth of the goodwill in the hearts of humanity.

Merry Christmas!


PS: and if he had any doubt, the Royal Academy Christmas finds that is capitalized, because it is the name of a religious holiday.

Sunday, December 19, 2010

Letter Endings Sincerely Template

Some answers about

What is USB 3.0?

is an evolution of USB 2.0, which improves transmission speed data between USB device and computer

"SuperSpeed \u200b\u200bUSB 3.0 and USB is the same?

If, as is the USB 2.0 is called Hi-Speed \u200b\u200b(high speed) USB 3.0 comes with the name of SuperSpeed \u200b\u200b(Super Speed). What I do not know is what name is going to get to the next evolution, perhaps MegaSpeed \u200b\u200b

How fast?

Improved speed for 10 USB 2.0 is up to 5 Gbps of data transmission. That means that a 700 MB video is going to move in less than 1 second (theoretically)

How does this rate?

have added a further connector, so that now the information travels from your computer to USB cable, and again on the other, allowing bidirectional communication (sending and receiving at the time)

Apart from this there are other improvements in waiting times, control of information and a little something more technical. Visit this link for more information http://www.usb.org/developers/ssusb

My computer has USB 2.0, do I can connect a USB 3.0 device?

Yes, this evolution has USB maintain compatibility with previous versions, but it will not give the maximum speed of the device, just going the speed of the computer's USB 2.0

What I have to make my computer supports USB 3.0?

We have to expand by 3.0 USB card.

For desktops, we have to open and fit a new card. In the case of PCMCIA cards for laptops are expanding ports

As an example of cards have the Transcend brand



USB 3.0 Hub Are?

Yes, you can connect devices with USB 2.0 and 3.0 and connects to a USB 3.0 port on your computer. USRobotics eg



"I can upgrade my computer to USB 3.0 without having to put a card?

No, USB 2.0 ports have 4 connectors compared to 5 USB 3.0, so most lack a connector for bidirectional communication. While payloads will improve performance, can not support the 3.0 standard. Another thing is that we can connect USB 3.0 to USB 2.0 speeds


Saturday, December 18, 2010

Sore Throat Hard To Swallow, Lumps In Throat

Why editorial policy is needed? Scrivener

The new English orthography has raised much controversy. The solution, incidentally or not, has been cast as the ears of an audience accustomed to following orders has sounded like a bucket of cold water: the rule is optional. Each speaker will decide whether or not to follow.

This has left many in uncertainty: "How can a rule be optional? And now how are things? ". When appropriate reflection not accompany this type of statement, you run the risk of chaos. If no rule is "mandatory," Why study grammar? Why make the effort to implement a standard? Why do I need to know the difference between an adjective and a pronoun, if anyway not matter how you write? And if everything is OK now, why the editorial asks me to do things a certain way ...?

Spelling and grammatical rules are a necessary tool to ensure communication. Do not write to us write because we need to communicate something: we have something to say and not enough to shout to the wind and comply with its fading into the air. The words issued through orality are fleeting and beautiful in its tragic and inevitable demise and the limits of its scope. The voice reaches far as it will sound. The shockwave has an end. And even though communications technology has changed this status, as they disappear once the transmission. So write. So we feel the need to leave, literally, a brand in the world. Tangible and visible footprint whose stay extends beyond our life span. Writing is a means to maintain the physical illusion of eternity ...

A common, Again I say anything except bring attention to the indisputable fact that I write to be read by another, by someone other than myself. And what are the consequences of this fact from the editorial point of view? If anyone reading the text lacks the code to decipher, the very act of reading is impossible. And even the most beautiful words written in stone will fade and perish in the shadow of the times, if they become signs without code, forms without content.

The editorial policy is responsible for maintaining a stable code, common and widespread of all readers to ensure access to the contents of the text. Spelling, grammar and even orthotypography are tools to maintain the stability of the graphical symbols that allow textual communication. The grammar also exists in the oral tradition: the sentences are syntax, the position of words helps to unravel its meaning.

text written in the syntax and morphology alone are insufficient; need of graphic symbols to make them obvious and just play some of the significant variations of the voice. For example, how to write a tone, emphasis, a break? A typical example is the tilde in English: a graphic sign switch (not even reach the status of letter) to indicate a difference in intonation. Not to mention the gestures, completely absent from the written text, if not by the description.

An editorial, whatever their specialty, is a media company whose main purpose is to publish texts that will be disseminated to a wide audience. The minimum print run is 500 copies (though it runs are even smaller) and a best seller can sell millions of copies, not only at the pinnacle of their success but over time (long seller) . And each copy, as we know, pass through many hands in his long life, which can reach ages.

In consideration of those readers countless drafted, we and apply editorial standards. No interest motivates us to constantly issuing orders and creating rules. We are interested in maintaining a comprehensive code and widely disseminated to ensure the success of the act of reading. Our books are published to be read and that's reason enough to make every effort to publish texts readable and understandable by audiences. That is the function of the standard.

Thus, the new spelling of the English Royal Academy and the American Academy is optional, but publishers still need their standards of publication and such, for the employees of these publishers are not optional: is a gesture of love and an act of responsibility to their readers.

Tuesday, December 14, 2010

Best Place To Get A Brazilian Wax In Eugene

1.4 for Windows beta

For those who are using Windows Scrivener in beta, is now available version 1.4. The previous betas expired and, therefore, to continue using the program to install this new version, which will expire on January 30, 2011. Should review the list unsolved problems, both for limitations on the version, as contributing to error reporting. It is expected that the commercial version is ready for the month of February.

Monday, December 13, 2010

How To Make Slide Projector

Some of the new spelling rules

This article is nothing new. It's just a summary of the changes already adopted the new spelling by language academies, both the English and the Americans, according to information provided by the press. The collected here as progress, while the work goes out of print shops across the Atlantic, reached my hands and I can start playing with its 800 pages.

Names lyrics
One of the novelties of the new spelling is reviewing the names of the letters of the alphabet, in a quest for unification and coherence. The issue has raised controversy because, although it seems a tiny issue, cultural traditions have proven their weight.


  1. The letter and will officially be called and Greek and will be called, hereinafter, e .
  2. The letter i stop i called and called Latin i .
  3. Lyrics b and officially referred to as v Be and uve . (In most articles, it is argued that "in America" \u200b\u200bto these letters are called "be high" and "be down" respectively. I leave it on record that that counts for Costa Rica. Here, apparently, We have always been in the English fashion, because since I have Alpha memory, I taught them as "be" and "vee").
  4. The digraphs ch and are considered digraphs ll and no letters. This shift does not imply elimination of the alphabet, on the contrary, they remain there, but now properly classified as signs consist of two letters and no one (digraphs).
  5. point is accepted as fully k English.
course, the new policy of no compulsory spelling leaves open the door for each country will follow the letter calling the way they see fit to its speakers, according to their habits and customs.


Ex , anti, pro
Until now, these three particles have been doubts in your script because they were at a fuzzy threshold, halfway between a preposition from the Latin, an adjective (as in the case of ex ) and a prefix, ie, a particle used to create new words.

has finally taken a step further in the debate and all three are classified as prefixes. Therefore, no longer write former president and anti social pro-American, but president, antisocial and pro-American. However, this rule applies only if a word is affected. As Thus, in examples such as former captain general and human rights must be written independently and without any script.


Tildes in only and
this has been completely removed by the word tilde only and demonstration (this, this, that, those ... ) , and remains even in cases of ambiguity. How would a reader if only means 'alone' or 'only'? The context will tell you. Often the problem with these cases is to look at the examples amphibology out of context. And in any case, for those who write and edit there is always another solution: fix the sentence and the context and say things differently, perhaps more elegant.

This was a change that could see it coming, but has been controversial. The rule remains optional, in particular in countries where there is a strong attachment to the tilde. In others, however, be a relief. Tilde



monosyllabic Since the previous edition of the Spelling (1999) had removed the tick in monosyllables that had traditionally maintained as script, fie, hui, Sion, that laugh before 1999 were written script, fie, I fled, Zion and laugh. The advice was simple: "considers that there is no gap, although this appears to indicate the pronunciation," but diphthong or triphthong "(p. 46). However, it still was allowed to use the tilde as spelling rules above the recommended. Apparently, now the tilde has been lost forever.

This rule does not affect diacritics, namely accents whose function is to distinguish different meanings. Some of these cases are: he / him, your / you, my / me, te / tea, plus or more, yes / yes, / giving, / I .

The only diacritical tilde has been lost is the or two digits (numbers). It is considered that this is a rule no longer applies, since modern computer systems allow a clear distinction between a letter and a or zero. Therefore, it is not permissible to write "5 or 6" but you write "5 or 6." Shift


generic terms prefixed to proper names
Capitalization of terms such as Gulf of Mexico and Calle Felipe IV have always given problem. The new spelling takes a clear position: the capital is removed entirely. We will have to read the new edition to see the scope of this standard. Until now admitted that the Panama Canal spelled with lower case outside of Panama, but with a capital in that country, because the channel central role in history and economic life of the nation. The same applied to the Iberian peninsula ( for Iberian English). Will have to see the new rule and start to apply local geographical features, such as the Gulf of Nicoya .


Qatar, Iraq and cuórum
That's right: cuórum . Qatar confess I find it an exotic, far away from my daily geography, and Iraq was already used to seeing it written this way. But quorum (which from now on, if you want to use it, should be in italics and without tilde) if I find it strange in its new version with English: cuórum . This decision has been taken to give consistency to the new decision to accept the letter k and English fully and to avoid the letter q, when not combined with or (as in cheese ) also represents the phoneme / k / . Therefore, only the letters c and k in initial position will this function.



foreign words Any words of foreign origin without adaptation into English is written in italics and accents. This applies to non-Latin words and expressions hispanicized as ex cathedra , casus belli and deux ex machina. We assume that hispanicized and hold their shape adapted as ibid and et alii.



In summary confirms the new spelling more changes proposed, judging by these developments. Must await the final publication for details, the minutiae and analysis. The hope is that you have won consistent and progress has been made for the good, the disambiguation of many of its old contradictions.

Sunday, December 12, 2010

Kenmore 80 Series New Drum

Disk USB 3.0 NAS, Network Attached Storage

What is it?

When it comes to your NAS, we are really referring to a network device (a separate device) that contains multiple hard drives to store information. You have the ability to manage the data from these records to gain speed and data security, along with high performance communication.

What I am seeing more and more on advertising for the home user, are devices designed for home networks or small businesses. There are also professional high performance devices which, although governed by the same principles have other capabilities and features.

It facilitates access to this data using different technologies such as FTP, itunes, torrent ... This allows easy use from any other network device we have, such as an Ipod

Store information

The capacity is determined by both the number and size of the disks containing at the same settings. In small devices typically have up to two hard drives and security settings in RAID1 (mirrored disks)

I mean, we have a two-disk NAS 1 TB hard drives, which would give us 2 TB of capacity, but can be configured as RAID 1 or mirror, to get an exact copy of data on a disc in the other. In this case the capacity is 1 TB NAS (a data disk and one backup)

To clarify what the units look at the link http://dunbit.blogspot.com/2009/ 07/megas-gigas-teras-que-follon-de.html

Communications

As important as having a high data capacity, is to have a good communication. Normally the home NAS have a network card to 1 Gbps (1000 Mbps) allows high transfer data.

usually find in professional devices for fiber optic connections to increase their performance.

They can also have one or more USB ports to manage the NAS or to add flash drives and connect them to a

Another interesting feature of some devices is the ability to access data from outside your network, just with internet access. This also requires a specific configuration for the local network where the NAS (fixed public IP, virtual ports settings of the router).

There are many information on these devices in http://iomega.com/nas/home-network-storage-es.html

Monday, December 6, 2010

Latest Saree 2010 In Chennai Pottys

Tutorial: What is my computer processor?

The processor or CPU is a fundamental part of computer performance. I have a couple of articles on the subject in What computer should I buy? Translating and advertising where I try to give more information on features and considerations for processors.

processor has to know that our computer and whether it is good or bad (considering it as high, medium or low performance), we must first find out what it is and then compared to other processors on the market.

steps to find out what processor your computer has
  1. Click on Start Menu
  2. Select with the right mouse button or My Computer
    Team
  3. Select the menu item Manage
  4. In the window that opens, select from the list on the left,
  5. Device Manager Expand the category
processor
Once we know that processor, should be compared with others. There are several pages where this will give us information, such as http://www.cpubenchmark.net/cpu_list.php

I leave a video tutorial where you see all the steps I mentioned, since we know what processor, to compare with other on the market.
processor

Sunday, December 5, 2010

Diablo 2 Bnclient Dll

What computer should I buy? What processor has to have?

in Christmas these questions often sound a lot. And wrote the article Translating advertising - processors trying to explain that a bit processor and importance, but I would like to discuss a few aspects to consider.
Go ahead, I'm no expert on the subject, I draw on my experience with some processors and manufacturers in the articles and forums on topic.

Since the processors are key in computers, we must look to the computer so we can hit better with our purchase.
  • If we want to surf the internet, email and view four videos, I really do not need anything special
  • If we are to ask photo editing or gaming, and we have to go
  • benefits
    If we to video editing or high-performance games, then we have to go to high-end products
will also be different, if we are thinking about laptops or desktops, as in the first premium is low so that the battery consumption longer life and in the latter that matters is performance above all else.

Without going into detail and commenting on processors from Intel, we can classify as follows
  • Basic Basic
    • Atom, simple notebook (netbook) Celeron
    • , low benefits
  • Basic
    • Pentium, a single processor to basics
    • Core Duo, 2 core processors
  • Media
    • Core 2 Duo processor, two processors in the same room, depending on the model we can have a decent performance
    • i3, two processors working as 4, the latest from Intel
    • i3 Mobile, idem but for the i3
      portable
  • High
    • Core 2 Quad, 4 processors, give good performance
    • i 5, 2 and 4 processors that work with high performance
    • i5 Mobile, same as above but for portable
  • Altos, very high
    • i7, 4 processors work as 8, high performance and high consumption
    • i7 Mobile, same as above but for laptops
are not all processors from Intel and I have not put any of AMD why I'm not familiar with this manufacturer, no otherwise.

What is clear is that the new more powerful processor is the more expensive the computer, so it is relatively easy to ascertain the performance of the equipment that we buy.

addition to the pages indicated in Article Translating advertising - processors, it is interesting the following address http://www.cpubenchmark.net/cpu_list.php . Allows you to search your computer's processor we are looking to buy and display in graphic form, the comparison with other processors, both Intel and AMD

Friday, December 3, 2010

Will Tricare Cover Motorcycle Accident

Tutorial: How to put a fixed IP address in Windows Vista

Normally the IP address of your computer is automatically assigned by the ADSL router and not have to worry about putting a fixed IP on your computer.
Sometimes it is necessary to manually configure the computer's IP, for example, connecting to a new router, a wireless access point or a network printer.
steps will be similar if we are talking about Windows Vista or Windows 7, but are a little different in XP.

To change the IP address of the network connection there are two ways, by the control panel must follow the following steps:
  1. Control Panel
  2. Select Network and Internet
  3. Select Center Network and Sharing
  4. left
    Select Manage network connections
  5. Select the connection you want to change with the right mouse button (eye on laptops usually come out 2, the wireless and cable)
  6. Select from the dropdown menu option Properties
  7. Select double click Internet Protocol Version 4 (TCP/IPv4)
  8. Enable the option Use the following IP address
  9. Fill both IP Address as subnet mask and click OK
have a video tutorial where indicated previous steps FIXED IP Video tutorial

On the icon toolbar
  1. Click on the Network icon notification area of \u200b\u200bthe taskbar (where the clock) and select Center Network and Sharing
    Resume
  2. step 4 of the previous case

Bad Doctor Touch On Ladies

Jing, screen capture (image and video)

Another tool I'm testing is Jing. Used to capture parts of the screen or full screen. These traps can be pictures or videos.
has, as always, free version and version payment. In the free version, among other things, just allows you to save videos in SWF format and the payment You can also save in MP4 format. Giving
high, we offer 2 Gb Free Screencast.com to upload videos and post them via links or embedded code.
At first glance it looks interesting, since video capture is quite good and also publish online is easy to make and manage.

Sunday, November 28, 2010

How Can I Know My Nforce Version ?



Broadly speaking this presentation summarizes all the issues that must be taken into account to set up a home network. This stay at issuu.com and it is recommended to view full screen.
Licencia de Creative Commons
Manual Home Networking by Dunbit (Javier Roig) is licensed under a Creative Commons Attribution 3.0 Unported License .

Saturday, November 27, 2010

Can I Trade Pokemon On Desmume Emulator

issuu, web store

has come to my hands as a free tool for publishing highly recommended online resources.

The first look is very good, because you can publish all types of documents, establishing them as public or private cataloging, etc ..., with a presentation compelling.

SlideShare is a style with presentations full page or only the default size. Also allows integration of a presentation at a page you have created.

To access you have to open up an account or use your facebook profile, as always applying the basic data

Monday, October 11, 2010

Coprocesador Presario V6000 En Windows 7

publications put the same music to all slides in a PowerPoint

The process is the same as inserting a song to be played on a slide, only then customize The performance of this song to sound on every slide

The first is to insert the first slide, a sound object. This item is in the Insert tab . We asked to state the sound file you want to use.

Once inserted the sound object, we need to go to the Tools tab Sound (this tab does not appear if the sound object, with a speaker, not selected)

In this tab, audio tools, we have the Sound Options section where this one down with several options: automatically, over and Click Play across slides . This last option is that we have to select.

From this moment, when we put in presentation mode, start playing the selected song until the end of the presentation (if we check the box of the same paragraph, Loop until its interruption)

I have not found this to PowerPoint 2003, but is the same in the PowerPoint version 2007 and PowerPoint 2010

Friday, June 18, 2010

Buying G35 Coupe With 100000 Miles

Home Networking Problem with null fields with ASP.NET image SQL Error

Let me explain first that I'm moving stage and the steps I have taken to solve the problems of storing a null value in a field of type image in a SQL database.

The SQL database I have a table with a field of type image that supports zero.
In this same database I create a stored procedure to insert and update the table

From. NET created a Typed Data Set where I create a DataTable with the fields of the SQL table and I assign to each field's data type. In the case of image field I assign the data type. NET System.Byte (). I use this DataTable to load the fields from multiple tables in the SQL database.

When calling the stored procedure from. NET I would point out the parameters in a SqlCommand and execute it as ExecuteNonQuery.


At first glance all the steps are working properly and I have no compilation error.

First error happens when I try to save a null value in the image field


For the point where error occurs in the class is automatically generated from the DataSet. Is taking place in the column in the DataTable image I created. Occurs because when you create the image I left field in the properties indicated that generates an exception if it encounters invalid.

I see two options to avoid this error

  • The first is a change of ownership NullValue Image field so that instead of generating an exception when they contain zero, that does not give anything (is an option down in that field)

  • The second is to change the code where I add the parameter @ image. Instead of using a shortcut IIF which evaluates the two sides (and then skips the error) If using a separate, so that if the image is null, does not come to assess.
seems that everything is fine, but when we re-run with another error.
In this case the error is generated when running the stored procedure command. The first thing you notice is that the speech error data type nvarchar , we have not used at any time.
If you put a breakpoint and look at the picture we sent to parameter stored procedure surprise we found that the type of data we are sending is a nvarchar (SqlDbType).

This is because adding the parameter to the command does not indicate any kind of data, but only pass the parameter name and value

solution is an indication in the command parameter the sql data type is an Image

So if we repeat the performance we see in the inspection of the @ image the command has disappeared type nvarchar the image and everything is working correctly


Friday, May 28, 2010

My 5 Month Old Has A Dry Cough

is not allowed HTTP POST verb accessing an html page

This error can result for several reasons, but I'm focus when trying to access generates an HTML page using the property PostBackUrl a control button, ImageButton, or LinkButton in ASP.NET.

Normally the aim is to go from one page to another by pressing a button. Putting on the property control PostBackUrl the name of the landing page works, except that set the target to an html page instead of aspx.

This has to do with cross-page posting. NET (which allows access from one page to the controls on the source page.) Html pages can not process a form submitted with HTTP post and when we produce a postback (server request) default form is sent to landing page.

There are several ways to solve this problem
  1. Change the button for a hyperlink to the destination (which may cause the page layout change too much)
  2. Set the button's click event indicating Response.Redirect , the landing page and remove the value of the property PostBackUrl
In the case of an HTML button (input type = "button") can schedule the event onclic with javascript on the client

In the case of a asp.net button control of the programming we do in the code file
Some links to learn more about this topic:

Wednesday, May 26, 2010

Difference Between Fakan And Real Boobs

Transform an HTML page to ASPX

On more than one occasion we need to add controls. net to a static HTML web page. To do this, we need to transform this HTML in ASPX page and if necessary link to a page of code in Visual Basic or C #
We
1 A copy of the HTML page and rename the extension to ASPX.

2 Add the @ Page directive at the beginning of the code.

3 Added within the body tags in a form with runat = server property that contains existing controls on page




From here we have a fully functioning aspx page in which can use asp controls. net.

If you also want to use programming in Visual Basic or C # we have to make any further step.

1 Add to draft a new element of type Class (from adding new elements) and put as name the aspx page and as an extension aspx.vb aspx.cs Visual Basic or C #.


Default asks if we want to save this new file in the App_Code folder, and it detects that a file of code, we can say no and they nest under the aspx file we created in the previous step
2 Modify the code file class aspx.vb / aspx.cs indicating that it is a partial class that inherits the class
Pages




3 Indicate to the ASPX page, which is the associated code file and class. For this we modify the @ page by adding parameters and ClassName CodeFile



From now we have totally transformed the site and operational controls to work with both. Net and to use code (in this example) Visual Basic or C #

Before
After

Friday, May 7, 2010

Denise Milani And Her Sister, Mother

Open docx Word 2007 documents from Word 2003 II

With the change of version of Office 2003 to Microsoft Office 2007 have been problems compatibility with Word documents, Excel, etc. Basically, these problems are because the 2007 stores information in a very differently than it did in previous versions. The extension is now used docx for Word, xlsx for Excel and macros have a different if compared to the doc and xls extensions of the 2003 version.

Microsoft pulled a plug that can be downloaded for free from their download center Add support for Office 2003 along with a comprehensive site explaining the details of the item Microsoft
Information
must be installed the plug on computers in which you want to open documents saved in the format 2007 and from that time, we can deal with no problem (at least those related to the version).
I

Wednesday, April 21, 2010

How To Switch Fund Lic

Home Networking - Home Networking Basics

Home Networking - What are and what they II
Home Networking - Home Networking Basics
III - Storage Networking Home Networking
IV - Network Print

We have several ways of interconnecting different devices, with wireless, wired or
a combination of both.
Connecting devices using WIFI. Use

Access, means that among the different devices we will not need any cable other than the one, since all have the capacity to send information wirelessly (computers, printers, hard disks, ...).
need at least one central element that you contact the various devices. Normally we use at home WIFI ADSL router, if you have one of them, and if not we would need also a wireless switch as the image that can connect different devices. Use

cables to connect computers

This option implies that we must unite the various devices by wire, but obviously not in any way but each device with a central unit to distribute the information.

Like the previous case in many cases we can use the ADSL router if you have multiple sockets or ports which connect the various cables.

Here begins the first problem, what I have to use cable?. Need to build a network with RJ45 Ethernet cable (are like phones but fatter, and with 8 threads)

If all devices have no mouth or port of these characteristics, can not connect directly to the network and servers will need adapters or connection (as discussed later)

Returning the device to interconnect, if the ADSL router at home we have no more than a network cable BOJA, we need a swicth, hub or hub to allow more computers to link (simplifying, like a thief to the plugs, so that a mouth can connect multiple cables)

A combination of the two previous Some

devices can be connected by wifi, such as a laptop, cable and other means, such as a desktop computer. This solution
we need a wireless router network with several outlets for Ethernet connectors.

What problems can be

is clear that we can have many different problems, primarily are related to the connection and related settings. I will focus on the connection and leave it to the next article related to the configuration.


  • We have a adsl router which is wireless and has only one outlet . We need to unite this router to a switch so that we can connect more computers. In case you want to use WiFi technology, we need to use one cordless.

  • ADSL Router with multiple outlets is not wireless network but . If we use multiple computers wired together no problem, but if we want WIFI have to do as the previous case.
  • I do not know if the computer has network card. The simplest is to look in the Device Manager to see that we have network cards on your computer. In the case we are talking about printers or hard disks have to see if you have any mouth to plug a network cable or wireless antennas.



Articles related to Internet and devices
http://dunbit.blogspot.com/2009/07/internet-no-funciona-que-hago-parte-i.html
http://dunbit.blogspot.com/2009/07/internet- non-work-to-do-ii.html
http://dunbit.blogspot.com/2009/08/traduciendo-la-publicidad-v-wifi-lan.html

Monday, April 19, 2010

Milena D Met-art Forum

I - What are and what they

Home Networking - What are and what they
Home Networking II - Basics III
Home Networking - Storage Networking Home Networking
IV - Network Print

home networks consist of interconnected computing devices in different our home, to work with them.

Many of us have a home network in our house, although we are not aware of it. The simplest example is when we have an ADSL router connected to a computer to surf the Internet. These two devices, in most cases are inherently a network in our home.

The concept of home network includes an important idea, which can connect different devices and access them all, for example we can add to our network of ADSL router and a computer, a second laptop and share files between them, then we have a network hard drive to save data to view from any computer, including connecting to a TV, we can also add a printer that can print from any computer and we can add many more.

may sound like science fiction that's assemble our network at home, but thanks to a lot of manufacturers are methods simplify device configuration, is a reality that does not require large computer skills (you may need more patience than anything else)

Throughout the various articles of the series will try to explain the basic concepts we need to know to know where to shoot when configuring your network.